When tapping molten iron from the blast furnace and charging molten iron into the converter, working conditions change rapidly. Can the dust removal air volume be matched in real time? When fans operate at reduced frequency, how can effective dust capture be guaranteed? After the system goes online, how much electricity can be saved, and how can the benefits be objectively evaluated?
These questions constitute key topics for iron and steel enterprises advancing energy-saving renovation of dust removal systems. —To enable intelligent optimization to follow clear rules, —To make energy-saving outcomes verifiable with solid evidence.
Guided by the Extreme Energy Efficiency Standardization Working Group of the China Iron and Steel Association, Luculent Technologies Co., Ltd. takes the lead in drafting the group standard Technical Specification for Intelligent Energy Efficiency Optimization of Dust Removal Fans in the Iron and Steel Industry (Draft for Comments) (hereinafter referred to as the Specification). The Specification defines basic requirements, preconditions, technical measures and assessment methods for intelligent energy efficiency optimization, providing a basis for the construction, operation and performance evaluation of relevant systems.
Comments are now publicly solicited from the whole industry, and all parties are warmly invited to jointly refine this document.
The dust removal system serves as the core guarantee for iron and steel enterprises to meet environmental protection standards, and meanwhile represents a major power consumer within the plant. In most cases, fans in the industry are selected according to maximum working conditions, and air volume adjustment relies on manual experience. There is no dynamic linkage between fluctuating working conditions and air volume demand, commonly resulting in delayed adjustment and mismatched supply and demand.
The core of intelligent energy efficiency optimization lies in enabling fan operation to precisely match on-site real-time demands. Integrating AI and mechanism models, data-driven modeling and intelligent optimal control algorithms, Luculent perceives changes in production conditions in real time, and collaboratively optimizes fan frequency, air dampers and valve parameters to form a closed loop of “perception – analysis – decision-making – regulation”.
Environmental compliance is prioritized to guarantee compliant operation. The Specification stipulates that the dust capture efficiency and emission concentration at each dust collection point shall not be worse than the levels before optimization, and applicable emission standards shall be continuously satisfied before energy-saving optimization is carried out.
Centered on “what prerequisites are needed, how to conduct optimization, and how to verify outcomes”, the Specification specifies four core aspects:
✅ Strictly observe the environmental protection bottom line. Normal production and environmental compliance are taken as prerequisites. Dust capture performance and emission levels shall not deteriorate after optimization, ensuring energy saving will not come at the cost of dust removal effect.
✅ Clarify construction prerequisites. Requirements for equipment speed regulation capacity, data acquisition capability and system interconnection capability are specified, helping enterprises clarify preparation points before renovation.
✅ Standardize the optimization process. It covers the full workflow of operation monitoring, model analysis, optimized regulation and performance feedback. Safety control boundaries and alarm mechanisms for abnormalities are set to ensure stable system operation.
✅ Unify evaluation methods. Based on operation data before and after renovation, electricity-saving benefits are scientifically assessed under identical or comparable working conditions, so that power savings can be measured and verified against unified standards.
As a practical technical standard rooted in industry realities and focused on implementability, the Specification delivers clear guidance for parties across the industrial chain:
✅ For iron and steel enterprises: Clarify renovation prerequisites and evaluation criteria to support project construction, operation management and acceptance inspection.
✅ For design institutes and research institutions: Unify definitions and technical requirements to facilitate scheme design, research and verification.
✅ For equipment and automation manufacturers: Clarify system access and operation requirements to boost coordination between equipment and intelligent optimization systems.
✅ For energy conservation, environmental protection and digital service providers as well as assessment bodies: Define implementation frameworks and evaluation benchmarks to improve the standardization of delivery and assessment.
Frontline practical experience forms a critical foundation for improving the Specification. Iron and steel enterprises, equipment manufacturers, service providers, research institutes and other relevant industrial organizations are sincerely invited to submit written suggestions on terminology, content framework, construction requirements, evaluation methods and on-site implementation of the standard.
You may add the WeChat contact of the drafting team to obtain the full text of the Specification and submit feedback, jointly supporting energy conservation and carbon reduction in the iron and steel industry.
Deadline for comments: November 30, 2026Contact: Manager Pan Tel: 18151000058 (WeChat available)